Price:
(as of May 28, 2025 02:30:16 UTC – Details)
Description:
- PWM signal generator, square wave rectangular wave signal generator
- A square wave is used to generate rectangular wave signals, supplied to DC motor or staper motor driver. Staper motor, servo motor, electric gripper, robot arm.
features:
- Two modes can be selected: PWM mode – frequency (continuous), duty cycle. Note that the number of pulses cannot be set in this mode, and the pulse is always emitted
- Pulse mode – positive pulse width time, negative pulse width time, delay time, and adjustable numbers of pulses
- With a start-stop button, the outer switch can also be used to control the output signal/off
- Wide voltage input 3.3-30V, with anti-reverse protection, 5.08 mm terminal wiring
- Mix the driver to feel dimming, speed regulation, control solanoid valves, etc. However, it is not possible to load directly such as electric lights, motors and solanoid valves.
Specifications:
- Ingredients: Plastic metal
- color black
Working voltage: 3.3 ~ 30V, with anti-reverse security - Frequency Range: 1Hz ~ 150KHz, accuracy about 1%
- Duty Cycle Range: 0-100%, 1% Steps
- Number of pulses: 1-9999, or infinite (performance ‘-stands for infinite)
- Delay output time: 0.000S-999S, minimum set 1MS can be set
Positive and negative pulse width length: 0.000s-9999s, minimum set 1MS can be set - Signal loading capacity: less than 30ma
- Output signal dimensions: dimensions are equal to supply voltage
PWM signal generator, square wave rectangular wave signal generator
Working voltage: 3.3 ~ 30V, with anti-reverse security
Frequency Range: 1Hz ~ 150KHz, accuracy about 1%
Duty Cycle Range: 0-100%, 1% Steps
A square wave is used to generate rectangular wave signals, supplied to DC motor or staper motor driver. Staper motor, servo motor, electric gripper, robot arm
