Price:
(as of Jun 08, 2025 22:55:37 UTC – Details)
Stapper motors run in accurately repeated stages, so they are motor of choice for machines requiring accurate position control. Nema17 1.6kgcm stapper motor per stage may currently provide 1.6 kg-cm torque. The position of the motor can be allowed to move or hold to a position with the help of stapper motor drivers. Nema17 1.6kgcm staper motor staper provides an excellent response to the motor drivers to start, prevent and reversed. They are very useful in various applications, especially which demands low speed with high precision. Many machines such as 3D printers, CNC routers and mills, camera platforms, XYZ plotters, etc. It is a brushless DC motor, so the life of this motor depends on the life of bearings. Status control is obtained by a simple open loop control mechanism that does not require complex electronic control circuitry. The motor shaft is mechanized for good grip with a pulley, drive gear, etc., and especially to avoid stalls or slips.
Brand: Nema; Operating Voltage: 12 ~ 24VDC; Supply current: 0.31 A/phase; Motor type: single shaft; Step angle: 1.8 °
Holding Torque: 1.6 kg-semi; Induction: 21 MH/phase; Resistance: 38.5 ω/phase; Rotor inertia: 34 grams-semi; The input pulse determines the rotation angle of the motor.
High accuracy of about 3 to 5% per step; Good start, stop and reverse; The control of this motor is less expensive due to exclusion of complex control circuitry. Speed is proportional to the frequency of input pulses
Size: approx:- length = 42 mm; Width = 42 mm; Height = 34 mm; Shipment Weight: 0.230 kg
Packed by:- Sharvi Technologies (OPC) Pvt. Ltd;; Address: – #09, CK Nagar, AECS Layout, Hosa Road, Bangalore -560100