Price: ₹1,499 - ₹763.00
(as of Jul 19, 2025 20:24:41 UTC – Details)
It is a replica of hot and latest, popular V6 hotnd, it not only allows you to print high temperature content such as PP/ Poly Carbonate and Nylone, but also eliminates specific hotnd meltdown failures associated with other types of hotnds. The latest hotand contains a PTFE liner that slides inside the upper part of the heat brake, which helps to prevent the misaller of the filament, which is never subject to high temperatures, so there is no risk of damage to the liner through overheating.
For Marlin firmware, under thermal settings -> #Define Temp_Sensor_x (X Your Extruder #) You should use #11: 100K Beta 3950 1% Thermister
Specificness:
Type: V6 J-HED, can be used either as Boden or Direct Feed Style
Thermister: NTC 3950 100K (Marlin Users should use Table 11 to define Temp sensor)
Package material:
1.75 mm w/ 0.4 mm nozzle 1 x metal j-head hot
1 x NTC 3950 100K Thermister, Leeds and DuPont Connector
1 x 12v 40W heater
12 V 0.13 A High Speed Cooling Fan 1 x Heat Sink Shroud
1 x 3ft tall, 4 mm OD, 2 mm ID, PTFE Boden Tube
2 x Quick Connect Strait Fitting
3D Printer Hotand, Metal J-Hed V6 Sangat Hotand for 1.75 mm filament, W/ 0.4 mm Nozzle
Heatsink Shroud and High Speed, 12V 0.13A 0.13A Cooling Fan / NTC 3950 100K Thermists, W / Leeds and Duppont Connector
12v 40W heater / 3ft tall, 4 mm od 2mm id ptfe boden tube and quick connect fitting
Can be used for hot end: ABS, PLA, PETG, and Most other traditional print materials
This hot end can reach more than 230C for high temperature performance.
